Browse
  • Get Started
  • Pivot Steps
  • Bridges
  • Sisal Steps
  • Wall Hub
  • How to Order
  • Pivot Steps vs. Wall-Mounted Hub

Step 1:  Select "Pivot Steps" or "Wall Mounted Hub"

Step 2:  Choose a pre-configured kit or DIY design

Step 3:  Select your Components

Choosing between the Pivot Steps and the "Hub"

  • You can do both!! Both styles are made of the same materials and look great together.
  • The "Hub" is a wall adaptation of our Elevation-II tension pole stye tower, so it is compatible with all of those components. Excellent for going vertical in a small space.
  • The "Pivot Steps" are more suited to covering larger horizontal distances and creating a Cat Super Highway to allow them to get from A to B, from up high.
  • Pre-Configured Kits
  • Ala Carte Steps

Kit includes the 2 x large carpeted shelves (ramps) and 3  x uncarpeted steps

5-Piece Ramp Kit Bundle

Sold out

Save $22 with bundle vs. individual components!

Free Shipping | We Pay The Tax


Kit includes the 1 x large carpeted shelves (ramps) and 2 x uncarpeted steps

3-Piece Ramp Kit Bundle

Sold out

Save $16 with bundle vs. individual components!

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

Create your own Cat SuperHighway with these pre-configured Pivot Step combinations! Once you attach the mounting block to a wall stud, the steps can be installed in 5 different orientations (-45, -22.5, 0, 22.5, 45-deg), allowing you to create a combination of ramps and horizontal surfaces that are very easy to climb without jumping.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Mounts directly to a SINGLE wall stud

Pivot Step

Sold out

Free Shipping | We Pay The Tax


Mounts directly to a SINGLE wall stud

Pivot Shelf

Sold out

For Horizontal Shelf OR Ramp!

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

Create your own Cat SuperHighway with our Pivot Steps! Once you attach the mounting block to a wall stud, the steps can be installed in 5 different orientations (-45, -22.5, 0, 22.5, 45-deg), allowing you to create a combination of ramps and horizontal surfaces that are very easy to climb without jumping.

Our wall steps are made of domestically grown and locally sourced, thick 3/4" birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Attaches between any 2 Wall-steps

Bridge

Sold out

Free Shipping | We Pay The Tax

Sisal Step

Sold out

Free Shipping | We Pay The Tax

  • Pre-Configured Kits
  • DIY Hub
  • Hub Components

Kit includes 3 x Hubs, 5 x Steps and 2 x Platforms

The 3 Hub Kit

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

The modular HUB is a wall mounted section of our Elevation-II pole, allowing you limitless configurations of steps, arranged vertically, horizontally, or even diagonally! It is mounted directly to a wall stud, making it extremely sturdy. Notches every 4" accept the steps, platforms, feeders and now even plant holders! We hand craft this product from scratch here in Matthews, NC.

This kit can be configured vertically, horizontally, or any way you like! If you need additional components, simply select them from the "Components" tab.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Steps sold separately

The Hub

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

The modular HUB is a wall mounted section of our Elevation-II pole, allowing you limitless configurations of steps, arranged vertically, horizontally, or even stair stepped! It is mounted directly to a wall stud, making it extremely sturdy. Notches every 4" accept the steps, platforms, feeders and now even plant holders! We hand craft this product from scratch here in Matthews, NC.

Once you have your design in mind, just add one or more Hubs to your cart, and then select whatever combination of components you want from the "Components" tab.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

  • Platform
  • Step
  • Feeder
  • Plant Holder

Elevation Platform

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

PLATFORM: All of our components (steps, platforms, feeders, plant holders) are compatible with BOTH the tension-pole system as well as the wall-mounted system. The wall-mounted "HUB" is essentially a 2 ft section of the tension pole mounted on brackets. If you're designing your own setup, you'll need to consider the age & agility of your cats and adjust the spacing between components accordingly.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Elevation Step

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

STEP: All of our components (steps, platforms, feeders, plant holders) are compatible with BOTH the tension-pole system as well as the wall-mounted system. The wall-mounted "HUB" is essentially a 2 ft section of the tension pole mounted on brackets. If you're designing your own setup, you'll need to consider the age & agility of your cats and adjust the spacing between components accordingly.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Elevation Feeder

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

FEEDER: All of our components (steps, platforms, feeders, plant holders) are compatible with BOTH the tension-pole system as well as the wall-mounted system. The wall-mounted "HUB" is essentially a 2 ft section of the tension pole mounted on brackets. If you're designing your own setup, you'll need to consider the age & agility of your cats and adjust the spacing between components accordingly.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.

Elevation Plant Holder

Sold out

Free Shipping | We Pay The Tax

  • Description
  • Materials
  • Shipping/Returns

PLANT HOLDER: All of our components (steps, platforms, feeders, plant holders) are compatible with BOTH the tension-pole system as well as the wall-mounted system. The wall-mounted "HUB" is essentially a 2 ft section of the tension pole mounted on brackets. If you're designing your own setup, you'll need to consider the age & agility of your cats and adjust the spacing between components accordingly.

Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.

Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs.   Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.